Install driver:
- Install the driver package to your notebook/pc.
- Connect the KWP2000 PLUS Flasher to a free USB port.
- At the window, point to the folder where you installed the driver package.
- Reboot.
How to READ data from a supported ECU:
- Connect the KWP2000 PLUS ECU Flasher to computer USB port and to the diagnostic port of the car
- Start the communication software in the computer.
- Turn ignition key to “ON” position. (Do not crank or start the engine).
- Select the ECU type you want to read/write from the given list.
- Select additional options (if needed)
- Click the READ button to read out the original data (where supported).
- Save the file to the Hard Disk, Edit or Forward it another folder
How to WRITE data to a supported ECU:
- Connect the KWP2000 PLUS ECU Flasher to computer USB port and to the diagnostic port of the car
- Start the communication software in the computer.
- Turn ignition key to “ON” position. (Do not crank or start the engine).
- Select the ECU type you want to read/write from the given list.
- Select additional options (if needed).
- Click the WRITE button and select the file you want to write
- Follow the instructions on screen
- Switch the ignition key to “OFF” position and wait for 10 seconds before starting the engine again.
Free Download Opel KWP2000 Operation Manual PDF
Get the file Download here | PDF-HOME
